Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

基于自适应关键点热图的遮挡篮球运动员检测算法

运动员检测是篮球运动智能化分析的基础,由于篮球视频存在场景复杂、目标运动快速、目标间遮挡严重的问题,现有目标检测技术不能实现对密集遮挡运动员的精确检测.为此,提出一种基于自适应关键点热图的遮挡篮球运动员检测算法.首先通过预先构建的全卷积编码-解码网络进行运动员特征提取,利用高斯核函数在特征图上渲染关键点热图,热图的渲染采用自适应策略,高斯核半径随着目标宽和高的变化而变化,能够加快网络收敛;然后在热图中提取运动员中心点,回归得到运动员宽高、位置等信息,省去了基于锚框检测中复杂耗时的后处理过程,更利于在遮挡条件下区分2个运动员.在篮球运动数据集BasketballPlayer上进行实验的结果表明,在复杂篮球视频场景下,该算法能有效地解决密集遮挡运动员之间漏检、误检和检测精度不高的问题,处理速度可达到26帧/s.     

包钢120t转炉滑板挡渣技术的改进

文章介绍了包钢120 t转炉滑板挡渣与红外下渣检测技术改进及实际应用情况,并与目前常用挡渣方式进行对比分析,结果表明:改进后挡渣成功率达到99％以上,下渣量控制在80 mm以内,钢水回磷平均控制在0.001％以内,提高了钢水的洁净度,为生产高附加值的钢种和降低生产成本奠定了基础.     

Feature selection and hyper parameters optimization for short-term wind power forecast

Applied Intelligence - Accurate wind power forecasting plays an increasingly significant role in power grid normal operation with large-scale wind energy. The precise and stable forecasting of wind...     

以辉锑矿为原料放电等离子烧结快速制备黝铜矿Cu_(12)Sb_4S_(13)及反应机理

采用辉锑矿为原料成功制备出Cu_(12)Sb_4S_(13)块体。研究以Sb_2S_3矿物为原料时烧结工艺对Cu_(12)Sb_4S_(13)合成的影响。在400 ～ 440℃温度区间内均可快速合成Cu_(12)Sb_4S_(13)块体且二次烧结能够进一步减小中间相CuSbS_2和Cu_3SbS_3。第二相Cu_3SbS_4和残留相CuS随着烧结时间的延长而降低。二次烧结前进行机械化球磨处理,干磨比湿磨更容易减小残留相。初次烧结块体的断面SEM和EDS能谱分析表明内部存在Cu或Cu_2S颗粒团聚现象。适当降低Cu或CuS摩尔量(化学计量比0.1 mol)能促进烧结块表面反应进行。烧结过程中,硫磺蒸汽压的导致烧结块表面成分和内部粉末的成分不同。     

Effect of Y concentration and film thickness on microstructure and electrical properties of HfO2 based thin films

In this work, we introduced a simple solution processing method to prepare yttrium (Y) doped hafnium oxide (HfO₂) based dielectric films. The films had high densities, low surface roughness, maximum permittivity of about 32, leakage current < 1.0 × 10^?7 A/cm² at 2 MV/cm, and breakdown field >5.0 MV/cm. In addition to dielectric performance, we investigated the influence of YO_1.5 fraction on the electronic structure between Y doped HfO₂ thin films and silicon (Si) substrates. The valence band electronic structure, energy gap and conduction band structure changed linearly with YO_1.5 fraction. Given this cost-effective deposition technique and excellent dielectric performance, solution-processed Y doped HfO₂ based thin films have the potential for insulator applications.     

1000MW燃煤机组工业废水零排放改造中脱水机的调试优化运行研究

以华能某2×1000 MW燃煤机组为例,对全厂原有工业废水处理系统进行升级改造,从而实现工业废水系统持续稳定运行.改造的重点在于脱水机的调试运行,实现脱水机在满足工业废水系统出力要求的基础上,连续稳定地产出合格的回用水和污泥.     

时间效应在悬滴法测定表面张力中的影响

表面张力是流体重要的物理性质,测定表面张力的方法通常包括毛细管上升法、最大气泡压力法、拉环法、旋滴法和悬滴法等。目前,最普遍的表面张力的测定方法为国家标准推荐的平板法或拉环法。然而,悬滴法作为一项成熟的表面张力测定方法且具备静态表面张力及动态表面张力测定功能,目前使用该法测定的较少。文章使用悬滴法测定较低含量的表面活性剂溶液静态表面张力时发现结果与拉环法差异较大,而测定单组分液体及含量较大的表面活性剂溶液,悬滴法与拉环法的测定数据差异较小,这种情况的相关报道较少。另外,使用动态表面张力测定探索了静态测定时出现差异的原因,并对应用悬滴法进行表面张力测定的适用范围进行了总结。使用悬滴法测定表面张力时,应注意时间效应的影响。